Brother MFC-8370DN User Manual Download Page 74

Page: 74 / 215

Chapter 8

Enter the number (up to 20 characters).
Press

Choose one of the options below:

Enter the name using the dial pad
(up to 15 characters).

Press

to store the number

without a name.

If you want to save a fax resolution along
with the number, choose one of the
options below:

To store the fax resolution, press

to select

Std

Fine

S.Fine

Photo

. Press

Press

if you don’t want to change

the default resolution. The default
setting is

Std

Note

You can also store the number by
pressing

Menu

Storing Speed Dial numbers

You can store your frequently used numbers
as Speed Dial numbers, so that when you
dial you will only have to press a few keys
(

, the three-digit number and

Start

). The

machine can store 300 Speed Dial numbers
(001 - 300).

Press

and enter a threedigit Speed

Dial location number (001-300).
If a number is not stored there, the LCD
shows

Press

to choose

Yes

Enter the number (up to 20 characters).
Press

Do one of the following:

Enter the name using the dial pad
(up to 15 characters).

Press

to store the number

without a name.

Do one of the following:

If you want to save a fax resolution
along with the number, press

to choose

Std

Fine

S.Fine

Photo

Press

if you do not want to

change the default resolution.

Note

• When you do a broadcast and you have

saved a scan profile along with the
number, the scan profile of the One
Touch, Speed Dial or Group number you
chose first will be applied to the broadcast.

• You can also store the number by

pressing

Menu

Summary of Contents for MFC-8370DN
























































































































































































































Search results

Summary of Contents for MFC-8370DN

Reviews:

Brands by name

Popular brands

Brother MFC-8370DN, User Manual

Search results

Summary of Contents for MFC-8370DN

Reviews:

Brands by name

Popular brands