manualshive.com logo in svg

Brother MFC-8370DN, User Manual

Share
Download
Brother MFC-8370DN User Manual Download Page 129

Troubleshooting and routine maintenance

119

C

Printing difficulties

C

Difficulties

Suggestions

No printout.

„

Check that the machine is plugged in and the power switch is turned on.

„

Check that the toner cartridge and drum unit are installed correctly. (See 

Replacing the drum unit

 on page 157.)

„

Check the interface cable connection on both the machine and your computer. 
(See the 

Quick Setup Guide

.)

„

Check that the correct printer driver has been installed and chosen.

„

Check to see if the LCD is showing an error message. (See 

Error and 

maintenance messages

 on page 132.)

„

Check the machine is online:
(Windows Vista

®

) Click the 

Start

 button, 

Control Panel

, 

Hardware and Sound

, and then 

Printers

. Right-click 

Brother MFC-XXXX Printer

. Make sure that 

Use Printer Offline

 is 

unchecked.
(Windows

®

 XP and Windows Server

®

 2003) Click the 

Start

 button and 

choose 

Printers and Faxes

. Right-click 

Brother MFC-XXXX Printer

. Make 

sure that 

Use Printer Offline

 is unchecked.

(Windows

®

 2000) Click the 

Start

 button and choose 

Settings

 and then 

Printers

. Right-click 

Brother MFC-XXXX Printer

. Make sure that 

Use Printer Offline

 is unchecked.

„

Contact your administrator to check your Secure Function Lock settings.

The machine prints unexpectedly 
or it prints garbage.

„

Pull out the paper tray and wait until the machine stops printing. Then turn off 
the machine and disconnect from the power for several minutes. (The 
machine can be turned off for up to 60 hours without losing faxes stored in the 
memory.)

„

Check the settings in your application to make sure it is set up to work with 
your machine.

The machine prints the first couple 
of pages correctly, then some 
pages have text missing.

„

Check the settings in your application to make sure that it is set up to work with 
your machine.

„

Your computer is not recognising the machine’s input buffer’s full signal. Make 
sure that you connected the interface cable correctly. (See the 

Quick Setup 

Guide

.)

The headers or footers appear 
when the document displays on the 
screen but they do not show up 
when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and 
bottom margins in your document to allow for this.

The machine does not print on both 
sides of the paper even though the 
printer driver setting is Duplex.

Check the paper size setting in the printer driver. You need to choose A4 size of 
paper (60 to 105 gsm).

The machine is not printing or has 
stopped printing and the machine’s 
Data LED is on.

Press 

Job Cancel

.

As the machine cancels the job and clears it from the memory it may produce an 
incomplete printout.

Summary of Contents for MFC-8370DN
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands