Brother MFC-7050C, Owner'S Manual

Page: 114 / 264

M E S S A G E C E N T E R
12-14
Changing Fax Forwarding Number Remotely
You can change the default setting of your fax forwarding number
from a remote fax machine.
1
Dial your MFC number.
2
When you hear the beep, immediately enter your Remote
Retrieval Access Code (
1 5 9
).
3
When you hear two short beeps, use the dial pad to press
9 5 4
.
4
Enter the new number of the remote fax machine where you
want your fax messages forwarded, and then press
.
You cannot use and as dial numbers. However, if you want
to store a pause, press .
5
To retrieve the Memory Status List, when you hear two short
beeps, use the dial pad to press
9 6 1 .
6
Use the dial pad to enter the number (up to 20 digits) of the
remote fax machine, and then press
.
7
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax
machine prints the Memory Status List showing the new
forwarding number.
8
Check the forwarding number.
If the new number is incorrect, return to Step 1 to reset it.