Brother MFC-4350, Owner'S Manual

Page: 115 / 257

101
M E S S A G E C E N T E R
Setting Maximum Time for Incoming Messages
Your MFC comes set to receive voice messages up to 30 seconds long. You
can change this setting to any length from 20 seconds to 60 seconds, in
5-second increments. This setting also applies to the Memo.
1
Press
Function
,
1
,
8
,
4
. The screen prompts you to select a
maximum time.
SELECT & SET
MESSAGE 30 SEC?
2
Press or to select the maximum time setting for incoming messages.
3
Press
Set
when the screen displays your setting.
4
Press Stop to exit.
Setting Toll Saver
When you set the toll saver feature, the MFC answers after four rings if you
don’t have messages, and after two rings if you do have messages. This way,
when you call the MFC, if it rings three times, you know you have no
messages, and can hang up, avoiding any toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver
must be off for the MFC to operate using your Ring Delay setting.
1
Press
Function
,
1
,
2
,
1
.
2
Press or to select TOLL SAVER (or RING DELAY).
3
Press
Set
when the screen displays your selection.
4
Press or to select ON.
5
Press
Set
.
6 Press
Stop
to exit.
ICM Recording Monitor
This feature lets you turn OFF (or ON) the speaker volume for voice
messages. When you turn the monitor OFF, you will not hear messages as
they come in.
1
Press
Function
,
1
,
8
,
5
.
2
Use or to select OFF (or ON).
3
Press
Set
when the screen displays your selection.
4
Press
Stop
to exit.
See
Setting
Ring Delay
p. 40