manualshive.com logo in svg

Brother HL-L9200CDW(T) HL-L9300CDW(T), User Manual, Page: 159 / 227

Share
Download
Brother HL-L9200CDW(T) HL-L9300CDW(T) User Manual Download Page 159

Routine Maintenance 

150

5

g

Hold the blue handle of the waste toner box and remove the waste toner box from the machine.

 

IMPORTANT

DO NOT reuse the waste toner box.

 

WARNING

 

• DO NOT put the waste toner box into a fire. It could explode, resulting in injuries.
• DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol 

or ammonia to clean the inside or outside of the machine. Doing so could cause a fire or electrical shock. 
Instead, use only a dry, soft, lint-free cloth.
(See the Product Safety Guide.)

 

 

NOTE

• Be sure to seal up the waste toner box tightly in an appropriate bag so that toner powder does not spill out 

of the waste toner box.

• Discard the used waste toner box according to local regulations, keeping it separate from domestic waste. 

If you have questions, contact your local waste disposal office.

 

Summary of Contents for HL-L9200CDW(T) HL-L9300CDW(T)




































































































































































































































Reviews:

No comments