Brother HL-L9200CDW(T) HL-L9300CDW(T) User Manual Download Page 136

Page: 136 / 227

Routine Maintenance

127

Replacing the toner cartridges

Model Name: For the item number of the toner cartridges, see

Replacing supplies

on page 123

The toner cartridge can print approximately 6,000 pages (black, cyan, magenta, yellow)

. Actual page count

will vary depending on your average type of document. When a toner cartridge is running low,
theTouchscreen displays

Toner Low

The toner cartridge that comes supplied with the machine must be replaced after printing approximately 6,000
pages (black, cyan, magenta, yellow)

Approximate cartridge yield is declared in accordance with ISO/IEC 19798.

NOTE

• The indication of remaining toner life will vary depending on the types of documents printed and your

usage.

• It is a good idea to keep a new toner cartridge ready for use when you see the

Toner Low

warning.

• To ensure high quality printing, we recommend using only Brother Original toner cartridges. When you

want to buy toner cartridges, contact your local Brother dealer or Brother customer service.

• We recommend cleaning the machine when you replace the toner cartridge. See

Cleaning and Checking

the machine

on page 153.

• DO NOT unpack the new toner cartridge until you are ready to install it.

Toner Low: X

If the Touchscreen displays

Toner Low: X

, buy a new toner cartridge for the colour indicated on the

Touchscreen and have it ready before you get a

Replace Toner

message.

Replace Toner

When the Touchscreen displays

Replace Toner

the machine will stop printing until you replace the toner

cartridge.
The Touchscreen indicates the toner cartridge colour that you must replace. (BK=Black, C=Cyan,
M=Magenta, Y=Yellow).
A new Brother Original toner cartridge will reset the Replace Toner message.

NOTE

For more information about how toner cartridge life is calculated, see

Important information for the toner

cartridge life

on page 214.

Summary of Contents for HL-L9200CDW(T) HL-L9300CDW(T)




































































































































































































































Search results

Summary of Contents for HL-L9200CDW(T) HL-L9300CDW(T)

Reviews:

Brother HL-L9200CDW(T) HL-L9300CDW(T), User Manual, Page: 136 / 227

Search results

Summary of Contents for HL-L9200CDW(T) HL-L9300CDW(T)

Reviews: