5-68
Confidential
2.9 Deep Sleep Function
In addition to the sleep function with the normal specifications, the deep sleep function is
prepared to reduce the power consumption.
The deep sleep function is used to stop the operation of the following functions whereas they
are available in the normal sleep mode.
- Operation of the wireless LAN
- Power supply to the paper tray 2
- Operation of all the fans
- Detection of files in a USB memory
<Transition conditions>
The printer goes into the deep sleep function when the user does not operate the printer (from
a PC) and no warning such as an error is issued after it goes into the normal sleep mode and
all the fans are stopped. When secure print exists, the printer does not go into the deep sleep
mode.
<How to Exit>
The printer exits from the deep sleep function when it receives an input from the outside, for
instance when it receives print data from a PC, or when any button on the control panel is
operated, or when the front cover is opened or closed.
■
Setting of ON/OFF of the deep sleep function
You can set ON/OFF of the deep sleep function so that the printer will not go into the deep
sleep function even when the aforementioned conditions are satisfied.
<Operating procedure>
(1) Press the
OK
button while the printer is in the ready state.
(2) Press the
or
button to display “General Setup” on the LCD, and then press the
OK
button.
(3) Press the
or
button to display “General Setup/Ecology” on the LCD, and then press
the
OK
button.
(4) Press the
or
button to display “Sleep Time” on the LCD, and then press the
OK
button.
(5)
Press the
Cancel
button and
button at the same time while “Sleep Time/*Min” is
displayed on the LCD. “Deep Sleep/On*” is displayed on the LCD.
(6)
Press the
or
button to switch Deep Sleep On and Off and display the state that you
want to set, and then press the
Go
button.
(7)
“Deep Sleep/Accepted” is displayed on the LCD, and the printer goes back to the ready
state.
Note:
- When no operation is made for 30 seconds during the switching operation, the printer
goes back to the ready state.
- The initial value of Deep Sleep is set to On.
- In the procedure (5), the present setting (On or Off) of Deep Sleep is displayed on the
LCD.
- “*” is displayed on the right side of the present setting (On or Off) of Deep Sleep.
Summary of Contents for HL-4140CN
