2-91
Confidential
■
Paper jam at the MP tray (Error code 8C)
<User Check>
- Check if the paper is loaded into the MP tray correctly.
- Turn back the paper loaded in the MP tray or change the orientation of the paper by 180°.
- Adjust the paper guide corresponding to the paper size.
- Check if too much paper is loaded in the tray.
- Check if the thickness of the paper is 60 to 163 g/m
2
.
■
Paper jam around the belt unit (Error code 88, etc.)
<User Check>
- Check if the belt unit is properly installed.
Step
Cause
Remedy
1
Foreign object around MP tray
Remove the foreign object.
2
MP paper feeding kit worn out
Replace the MP paper feeding kit.
3
MP registration front sensor
failure
Check the sensor performance following
the procedure described in
. If any problem occurs, replace the
MP paper empty/registration front sensor
PCB ASSY.
4
Engine PCB failure
Replace the engine PCB ASSY.
5
Main PCB failure
Replace the main PCB ASSY.
Step
Cause
Remedy
1
Registration rear actuator
malfunction
Re-assemble the registration rear
actuator.
2
Paper eject actuator
malfunction
Re-assemble the paper eject actuator.
3
Harness connection failure of
paper eject sensor PCB ASSY
Check the harness connection of the
paper eject sensor PCB ASSY and
reconnect it.
4
Harness connection failure of
drum drive motor
Check the harness connection of the
drum drive motor and reconnect it.
5
Paper eject sensor PCB failure
Replace the paper eject sensor PCB
ASSY.
6
Drum drive motor failure
Replace the drum drive motor.
7
Rotation failure of the heat roller
Replace the fuser unit.
8
Engine PCB failure
Replace the engine PCB ASSY.
9
Main PCB failure
Replace the main PCB ASSY.
Summary of Contents for HL-4140CN
