5-20
Confidential
■
Switching ON/OFF of Deep Sleep function
<Function>
This function is to switch whether or not to permit the printer to go into Deep Sleep when
StoreData(Secure) exists in the main body.
“*” is displayed at the end of the currently specified function in the LCD display.
<Operating procedure>
(1) Press the
or
button to display “MAINTENANCE 45” on the LCD in the initial state of
the maintenance mode. Then, press the
OK
button. The “USBNo.” will appear on the
LCD.
(2) Press the
or
button to display “DpSlp.StrDt” and then press the
OK
button.
(3) Select “DpSlp.StrDt =ON” or “DpSlp.StrDt =OFF” by pressing the
or
button, and
press the
OK
button.
(4) “Accepted” is displayed on the LCD, and the printer goes back to the initial state of the
maintenance mode.
■
Change of the transfer current setting (Only for Japanese hagaki printing)
<Function>
Dots appeared when hagaki printing is performed can be alleviated by changing the transfer
current setting.
<Operating procedure>
(1) Press the
or
button to display “MAINTENANCE 45” on the LCD in the initial state of
the maintenance mode. Then, press the
OK
button. The “USBNo.” will appear on the
LCD.
(2) Press the
or
button until “Special Printing” is displayed to press the
OK
button.
(3) Press the
or
button to change the setting, and press the
OK
or
Go
button.
There are four setting options: "Default", "HAGAKI1", "HAGAKI2", and "HAGAKI3".
(“*” is displayed at the end of the currently specified function in the LCD display.
The initial value is “Default”.)
(4) “Accepted” is displayed on the LCD, and the printer goes back to the initial state of the
maintenance mode.
(5) Perform hagaki printing again to check if the dot symptom is alleviated.
(6) When the symptom is not alleviated, repeat the procedures (1) to (4) to set an optimum
option, and then perform hagaki printing.
LCD
Description
DpSlp.StrDt =ON
Even when StoreData(Secure) exists, the Deep Sleep function
operates.
DpSlp.StrDt =OFF
When StoreData(Secure) exists, the Deep Sleep function does
not operate. (default)
Note:
This function is enabled when the Deep Sleep function is set to ON.
Summary of Contents for HL-4140CN
