![background image](http://html.mh-extra.com/html/brother/hl-4140cn/hl-4140cn_service-manual_17203041.webp)
2-10
Confidential
3.
ERROR INDICATIONS
This printer includes a self-diagnosis function. If the printer does not work normally it judges
that an error has occurred, and indicates the corresponding error message on the LCD, which
in turn helps the service men to quickly find out the problem.
3.1 Error Codes
The errors with a mesh background in the table below do not occur in the normal operation.
They might occur due to noise around the installation site, change of the power supply
voltage, and failures in the software.
Error
codes
Problem
Refer
to:
0F
The back cover is open upon
duplex printing. (The back cover
sensor is OFF.)
10
Inter-color position alignment
adjustment failure. (Error, which
cannot be recorded, occurs.)
11
Inter-color position alignment
adjustment failure. (Toner of the
color which is being used
reached the end of life.)
12
Inter-color position alignment
adjustment failure. (Incorrect
measurement value of
inter-color position alignment
adjustment.)
16
Paper of unsupported size for
duplex printing or paper of
different sizes is loaded.
17
The paper tray 1 is not installed
before printing. (The cassette of
the T1 paper edge sensor is
open.)
18
The paper tray 2 is not installed
before printing. (The cassette of
the T2 paper edge sensor is
open.)
19
The drum unit reached the end
of life.
1A
Condensation occurred on the
laser unit.
1B
Cyan drum error.
(An error occurred after the
counter value exceeded the
value more than twice as long as
the life of the drum.) (Printing is
not available until the drum unit
is replaced.)
1C
Magenta drum error.
(An error occurred after the
counter value exceeded the
value more than twice as long as
the life of the drum.) (Printing is
not available until the drum unit
is replaced.)
1D
Yellow drum error.
(An error occurred after the
counter value exceeded the
value more than twice as long as
the life of the drum.) (Printing is
not available until the drum unit
is replaced.)
1E
The drum unit will reach the end
of life soon.
1F
More than the specified number
of the option trays is installed.
20
Black laser diode error (K).
21
Yellow laser diode error (Y).
22
Magenta laser diode error (M).
23
Cyan laser diode error (C).
24
Internal temperature sensor error.
25
Develop drive motor error.
26
Belt drive motor error.
Error
codes
Problem
Refer
to:
Summary of Contents for HL-4140CN
