manualshive.com logo in svg

Brother HL-3040CN, Service Manual, Page: 57 / 437

Share
Download
Brother HL-3040CN Service Manual Download Page 57

2-23

Confidential

3.5.6 Toner cleaning

<Flow of toner cleaning>

(1) Toner remaining on the exposure drum which has not completely been transferred on to 

the paper is pulled onto the drum cleaner with a lower potential and the drum is cleaned.

(2) After the above step, the potential of the drum cleaner is raised during printing, and such 

attracted toner is returned to the exposure drum again.  The returned toner is attracted to 
the belt unit by lowering the potential of the transfer roller.

(3) The toner attracted to the belt unit is collected by the belt cleaner below the unit, and 

stored in the waste toner box.

Fig. 2-24

Memo:

When the toner returns to the exposure drum from the drum cleaner, the develop roller is 
separated from the exposure drum to prevent color mixture.

Drum cleaner

Paper

Belt

Develop roller

Exposure drum

Drum cleaner

Exposure 

Develop roller

Drum

Belt

Transfer roller

Belt

Cleaning shaft

Waste toner box

Cleaning

Back-up

roller

roller

Belt cleaner

Paper

cleaner

drum

Summary of Contents for HL-3040CN






















































































































































































































































































































































































































































Reviews:

No comments