manualshive.com logo in svg

Brother HL-3040CN, Service Manual, Page: 345 / 437

Share
Download
Brother HL-3040CN Service Manual Download Page 345

6-8

Confidential

(3) Click the “Brother Maintenance USB Printer” icon to select.  Drag the necessary firmware 

program file such as LZXXXX_$.upd and drop it.

(4) Upon completion of rewriting, the machine restarts and returns to the ready state 

automatically. 

Note: 

After rewriting Sub firmware (GDI or PCL/PS) or Main firmware is completed, the 
machine returns to the ready state.  To continue rewriting the other program files, 
turn off the power switch of the machine, and turn it on again while pressing the 

Go 

and 

Cancel 

buttons at the same time.  Check that “

” appears on 

the LCD and start rewriting.

Summary of Contents for HL-3040CN






















































































































































































































































































































































































































































Reviews:

No comments