manualshive.com logo in svg

Brother HL-3040CN, Service Manual, Page: 135 / 437

Share
Download
Brother HL-3040CN Service Manual Download Page 135

3-71

Confidential

<Drum cleaning function of product>

(1) Open the manual feed slot cover.

Fig. 3-11

(2) Using both hands, slide the manual feed slot paper guides to the width of the paper that 

you are going 

to use.

Fig. 3-12

(3) Using both hands, put one piece of paper in the manual feed slot until the front edge of 

the paper touches 

the paper feed roller.  Wait until the machine automatically feeds 

the paper.  When you feel the machine pull in the paper, let go.

Fig. 3-13

Note: 

If there is any problem in the print quality, be sure to clean the drum unit in accordance with 
“Drum cleaning function of product” provided below.
If the problem still persists, be sure to clean the drum unit manually in accordance with 

“Drum unit cleaning” in this chapter

.

Summary of Contents for HL-3040CN






















































































































































































































































































































































































































































Reviews:

No comments