manualshive.com logo in svg

Brother HL-1030, Service Manual

Share
Download
Brother HL-1030 Service Manual Download Page 9

REGULATION

vii

REGULATION

LASER SAFETY (110 - 120V MODEL ONLY)

This printer is certified as a Class 

I

 laser product under the US Department of Health and

Human Services (DHHS) Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968.  This means that the printer does not produce
hazardous laser radiation.

Since radiation emitted inside the printer is completely confined within the protective
housing and external covers. the laser beam cannot escape form the machine during any
phase of user operation.

FDA REGULATIONS (110 - 120V MODEL ONLY)

The US Food and Drug Administration (FDA) has implemented regulations for laser
products manufactured on and after August 2, 1976.  Compliance is mandatory for
products marketed in the United States.  One of the following labels on the back of the
printer indicates compliance with the FDA regulations and must be attached to laser
products marketed in the United States.

The label for Japanese manufactured products

MANUFACTURED:

K

BROTHER INDUSTRIES, LTD.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561,
Japan.
This product complies with FDA radiation performance
standards, 21 CFR Subchapter J.

The label for Chinese manufactured products

MANUFACTURED:

C

BROTHER Corporation (Asia) Ltd.
Shenzen Buji Nan Ling Factory

Gold Garden Ind., Nan Ling Village, Buji, Rong Gang,
Shenzen, CHINA
This product complies with FDA radiation performance
standards, 21 CFR Subchapter J.

Caution
Use of controls, adjustments or performance of procedures other than those specified in
this manual may result in hazardous radiation exposure.

Summary of Contents for HL-1030




















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands