2-21
Confidential
Scanner Error
-
Detected that the first side CIS flat
cable or second side CIS flat cable
was not inserted correctly when
function code 55 was executed.
A white level not within the
standard was scanned when
function code 55 was executed.
A black level not within the
standard was scanned when
function code 55 was executed.
Self-Diagnostic
Turn the power off,
then on again. Leave
the machine for 15 min.
An error occurred in the fuser unit
when the power switch was turned
ON or sleep mode was released.
Will Automatically
Restart within 15
minutes.
Rechecking the error after the
power switch was turned OFF and
then ON again because an error
was detected in the fuser unit.
(This message is displayed for
approximately 15 minutes when
the machine is restarted after error
code 6901 has occurred.)
Size Error DX
Press Stop key.
Specify the correct
paper and load the
same size paper as the
Printer driver setting.
A tray set to duplex printing-
incompatible size was specified in
duplex printing.
Specify the correct
paper.
The registration rear sensor
detected that the paper fed was
smaller or larger than the specified
size in duplex printing mode.
Size mismatch
Fax received. Set
correct paper size in
menu.
The paper size setting for the
machine is other than A4, Letter,
Legal or Folio when receiving fax.
Reload correct paper,
then press Start.
Detected that the size of the paper
set to paper tray was over 10 mm
shorter than letter size when
receiving fax or printing a list/
report.
When printing from the paper tray,
the size of paper set in the paper
tray does not match the size
specified by the driver.
Toner Ended
Open the Front Cover,
replace Toner
Cartridge.
The toner cartridge has reached
the upper limit in the toner
continuous printing mode.
Toner Low
-
Dot count or develop roller counter
of the toner is reaching the upper
limit.
Error Messages
Description
Error
codes
Refer
to:
Upper line
Lower line
