Brother DCP-9055CDN, Service Manual

Page: 61 / 532

2-23
Confidential
AB Scanning resolution change
error in the maintenance mode. 2-80
AC Scanning failure upon FAX
transmission (Second side) 2-80
AD Timeout error during waiting for
completion of scanning DMA
transfer. 2-80
AE The document scanner unit fails
to detect the home position. 2-81
AF The white tape cannot be
detected. 2-81
B0 Scanning FFC connection
failure. 2-81
B1 Dark level offset data level error
for scanning. 2-82
B2 Gain control data level error for
scanning. 2-82
B3 The scanning area setting left
edge detection error. (white tape) 2-82
B4 The scanning area setting right
edge detection error. (white tape) 2-82
B5 The scanning area setting
reduction detection error. (white
tape) 2-82
B6 The scanning area setting
enlargement detection error.
(white tape) 2-82
B7 A/D converter standard voltage
failure; at High side. 2-83
B8 A/D converter standard voltage
failure; at Low side. 2-83
B9 Scanning light adjustment error. 2-83
Error
codes
Problem
Refer
to:
BA Scanning outside light detection
error. 2-83
BB White level data error. 2-84
BC Scanning failure upon FAX
transmission. (Second side) 2-84
BD Black level data error. 2-84
BE The scanning area start edge
detection error. 2-84
BF The document is too long for
ADF duplex feeding. 2-85
C0 Failure to detect a new black
toner cartridge. 2-85
C1 Failure to detect a new yellow
toner cartridge. 2-85
C2 Failure to detect a new magenta
toner cartridge. 2-85
C3 Failure to detect a new cyan
toner cartridge. 2-85
C4 Paper tray 2 pressing plate up/
down error. 2-86
C5 Energization failure of erase
lamp. 2-86
C6 Pressure engagement/
disengagement failure of toner
cartridge. 2-87
C7 Insufficient memory. 2-87
C8 RAM area for secure data full. 2-87
C9 Defective DIMM is installed. 2-88
CA USB device overcurrent error. 2-88
CB The belt unit is not installed. 2-88
CC The fuser unit is not installed. 2-89
CD The drum unit is not installed. 2-89
Error
codes
Problem
Refer
to: