Brother DCP-9055CDN, Service Manual

Page: 425 / 532

5-26
Confidential
■ Detail description
AutoFF Switching of the auto form feed On/Off Off
AutoFF Time Switching of the time-out period
of the auto form feed 1 to 99 (seconds) 5
FF Surpress Switching of the FF Suppress On/Off Off
Auto LF Switching of the auto LF On/Off Off
Auto CR Switching of the auto CR On/Off Off
Auto WRAP Switching of the auto CRLF at
the print width On/Off Off
Auto Skip Switching of the Skip at the
backend/tip of the paper On/Off On
Left Margin Switching of the margin at the
left end 0 to 145 (columus) 0
Right Margin Switching of the margin at the
right end 10 to 155 (columus) 80
Top Margin Switching of the margin at the
upper end 0 to 2.00 (inches) 0.5
Bottom Margin Switching of the margin at the
bottom end 0 to 2.00 (inches) 0.5
Lines Number of the text lines in the
page 5 to 128 (lines) 60
Error Print Switching of the ErrorPrint of
the PostScript On/Off On
LCD Detail description
Manual Feed Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/Fontlist/Configuration from the panel. When
select the tray on the computer, the setting becomes effective. And this
setting is ignored.
Resolution Effective only for the print from the computer. When set the Resolution
on the computer, the setting becomes effective. And this setting is
ignored.
Toner Save Effective for all print, and change the setting of the Function Menu.
However, as for the Copy, this setting becomes invalid. When set the
Toner Save or the computer, the setting becomes effective. And this
setting is ignored.
Density Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel. Link the
setting of the Toner Save. Judge the both setting, and decide the
density. When set the Density or the computer, the setting becomes
effective. And this setting is ignored.
JB-Can Time Configure the setting for until the host time-out at the Job Cancel. The
setting value is the second time scale.
Sleep Time Configure the setting for the time until shift to the Sleep Time. Change
the setting of the Function Menu.
LCD Description Set value
Initial
value