manualshive.com logo in svg

Brother DCP-9055CDN, Service Manual

Share
Download
Brother DCP-9055CDN Service Manual Download Page 526

App.2-1

Confidential

APPENDIX 2 DELETION OF USER SETTING INFORMATION, ETC.

In this machine, the user setting information is stored in the EEPROM and flash memory of the main 
PCB.  You can delete all the data listed below at a time with the procedure given below.

- Information related to Net

- User setting information

<Operating Procedure>

(1) Press the 

Menu

 button while the machine is in the ready state.

(2) Press the

or

button, then the "Initial Setup" or "General Setup" will appear on the LCD 

and press the 

OK

 button.

(Which will appear, "Initial Setup" or "General Setup", depends on the model.)

(3) Press the

or

button, then the "Reset Menu" will appear on the LCD and press the 

OK

 

button.

(4) Press the

or

button, then the "All Settings" will appear on the LCD and press the 

OK

 

button.

Non Touch panel model

(5) The "1.Reset/2.Exit" will appear on the LCD.

(6) Press the 

1

 button, and the user setting information is deleted, and the machine goes back to         

the ready state.

Touch panel model

(5)  The "Yes/No" will appear on the LCD.

(6)  Press the "Yes", and the user setting information is deleted, and the machine goes back to 
      the ready state.

Note: 

The machine returns to the ready state automatically if no panel operation is implemented 
for 30 seconds.

Summary of Contents for DCP-9055CDN





















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands