Brother ADS-2600W, Service Manual

Page: 96 / 159

3-30
Confidential
(14) Release the hook, then remove the document detection actuator and the document
detection actuator spring from the upper chute.
(15) Remove the document detection actuator spring from the document detection actuator.
(16) Remove the two taptite bind B M3x10 screws. Then remove the earth harness (WH) and
the pinch roller support plate from the upper chute.
(17) Remove the document scanning position actuator and the document scanning position
actuator spring from the upper chute.
(18) Remove the document scanning position actuator spring from the document scanning
position actuator.
Fig. 3-27
HARNESS ROUTING: Refer to “2. Panel PCB ASSY” .
Assembling Note:
• Attach the document detection actuator spring on the position described in the
illustration above.
• Attach the document scanning position actuator spring on the position described in the
illustration above.
Taptite bind B M3x10
Upper chute
Document scanning
position actuator spring
Document detection
actuator spring
Hook
Document scanning
position actuator
Pinch roller support plate
Earth harness (WH)
Document detection actuator
Document detection
actuator spring
Document
detection actuator
Document scanning
position actuator
Document scanning
position actuator spring