Brother ADS-2600W, Service Manual

Page: 50 / 159

2-24
Confidential

Error code E700 to EC00
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
 Error code ED00
Communication between the wireless LAN PCB and the main PCB cannot be established at
machine startup.

Error code EE00
Detected communication failure after communication between the wireless LAN PCB and the
main PCB was established.

Error code EF00 to F800
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
 Error code F900
The country code was not entered correctly.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable ED
Step Cause Remedy
1
Connection failure of the wireless
LAN PCB harness Check the connection of the wireless LAN PCB
harness, and reconnect it if necessary.
2 Wireless LAN PCB failure Replace the wireless LAN PCB ASSY.
3 Main PCB failure Replace the main PCB ASSY.
Print Unable EE
Step Cause Remedy
1 Wireless LAN PCB failure Replace the wireless LAN PCB ASSY.
2 Main PCB failure Replace the main PCB ASSY.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
---
Step Cause Remedy
1
The country code was not
entered correctly. Reenter the country code. (Refer to "1.3.13
Setting by country (function code: 74)" in
Chapter 5.
)