Brother 882-W30, Operation Manuals

Page: 139 / 236

SEWING THE STITCHES
U
tili
ty
S
tit
ch
es
137
3
Fagoting
When there is a space between two fabrics with
thread sewn over the space to join the fabrics
together, it is called fagoting. Use this stitch when
sewing blouses or children’s clothes.
a
Baste two pieces of fabric onto thin paper,
leaving a space of 4 mm (approx. 3/16 inch)
between the fabrics.
* If you draw a line down the middle of the thin paper
or water soluble stabilizer, sewing is easier.
a
4.0 mm (approx. 3/16 inch)
b Paper
c
Basting stitches
b
Select or .
c
Attach presser foot “J”. Align the center of
the presser foot with the middle of the
space between the fabrics and begin
sewing.
a Basting stitches
d
When sewing is finished, gently tear the
paper away.
Tape or Elastic Attaching
a
Select a straight stitch and attach presser
foot “J”.
b
Set the stitch length to 4.0 mm (approx. 3/
16 inch), and loosen the upper thread
tension to 2.0 (“Setting the Stitch Length”
on page 86 and “Setting the Thread
Tension” on page 87).
c
Sew two rows of straight stitches on the
right side of the fabric, then pull the bobbin
thread to create the necessary gather.
d
Place the tape over the gather, and hold it
in place with basting pins.
a Tape
Memo
• For details on each stitch, refer to “STITCH
SETTING CHART” on page 218.
Memo
• Use a thick thread.
Memo
• Be sure that neither automatic
reinforcement nor automatic thread
cutting is selected.
Memo
• Before sewing the straight stitch, rotate the
handwheel toward you (counterclockwise)
and pull up the bobbin thread. Holding the
top and bobbin thread, pull a length of
thread out from the rear of the machine. (Be
sure that the presser foot is raised.)