Brother 882-W07 Operational Manual Download Page 276

Page: 276 / 380

EDITING PATTERNS

274

Use

to change the spacing.

Press

to increase the character spacing.

Press

to decrease the character spacing.

Press

to return the pattern to its original

appearance.

Press

to return to the original screen.

Reducing Character Spacing

The spacing between characters can be reduced to
50% of the narrowest character in the group.

Note

• It is not recommended to edit data and

transfer to other or older version machines.
Same features do not apply in other
machines, so problems may occur.

• Character spacing can be reduced only

when characters are arranged normally on a
straight line.

Summary of Contents for 882-W07





























































































































































































































































































































































































Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands

Brother 882-W07, Operational Manual

Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands