Brother 882-W07 Operational Manual Download Page 189

Page: 189 / 380

BEFORE EMBROIDERING

Embr
oi

de
ry

187

Press

to lock all keys and buttons.

→

The entire screen becomes white, and all keys and
operation buttons are locked.

Raise the presser foot lever.

Push the black button on the presser foot
holder and remove the presser foot.

Black button

Presser foot holder

→

Remove the presser foot from the presser foot
holder.

Use the included screwdriver to remove the
screw of the presser foot holder, then
remove the presser foot holder.

Screwdriver

Presser foot holder

Presser foot holder screw

→

Remove the screw and presser foot holder.

Position the embroidery foot “W2” on the
presser foot bar from behind.

Presser foot bar

Hold the embroidery foot in place with
your right hand, and then use the included
screwdriver to securely tighten the presser
foot holder screw.

Presser foot holder screw

Note

• Instead of simply loosening the screw, it

must be temporarily removed, while optional
embroidery foot “W” can be installed simply
by loosening the screw.

CAUTION

• Use the included screwdriver to firmly tighten

the screw of the presser foot holder. If the
screw is loose, the needle may strike the
presser foot and possibly cause injury.

Summary of Contents for 882-W07





























































































































































































































































































































































































Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands

Brother 882-W07, Operational Manual

Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands