Brother 882-W07 Operational Manual Download Page 262

Page: 262 / 380

EMBROIDERY APPLICATIONS

260

Embroider the same pattern on the appliqué
fabric.

Remove the embroidery frame from the
embroidery unit, and cut around the
outside of the stitches.

Select the satin stitch frame pattern of the
same shape as the appliqué.

Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.

Note

• Do not remove the fabric from the embroi-

dery frame to cut it. Also, do not pull strongly
on the fabric. Otherwise, the fabric may
loosen in the frame.

Note

• Do not change the size or position of the

pattern.

• If you change the size or position of the pat-

terns when selecting them, make a note of
the size and location.

Appliqué material

Summary of Contents for 882-W07





























































































































































































































































































































































































Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands

Brother 882-W07, Operational Manual

Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands