Brother 882-W07 Operational Manual Download Page 250

Page: 250 / 380

REVISING THE PATTERN

248

Press the “Start/Stop” button to begin
embroidering the remaining character
patterns.

Uninterrupted Embroidering
(Using a Single Color)

A selected pattern can be stitched out in one color
instead of multicolor. The machine will hesitate
but not stop between color steps, and then

continue till the pattern is completed. Press

for the multicolor steps to become shaded and the
selected pattern will embroider in a single color,
instead of changing the thread while

embroidering. Press

again to return to the

pattern’s original settings.

→

The thread color displayed on the screen will be
grayed out.

Memo

• Even if uninterrupted embroidering

has

been set, the automatic thread cutting
function and the thread trimming function
can be used (see page 235 and 236).

Summary of Contents for 882-W07





























































































































































































































































































































































































Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands

Brother 882-W07, Operational Manual

Search results

Summary of Contents for 882-W07

Reviews:

Related manuals for 882-W07

Brands by name

Popular brands