Brother 1034DX Service Manual Download Page 53

Page: 53 / 87

Disassembly

2 - 42

isassembly

Feed mechanism

Feed dial

1. Remove the screw (screw, bind M4x6) to remove the adjusting dial spring.
2. Remove the feed dial lid from the feed dial.
3. Remove the screw (set screw, socket (CP) M4x4) to remove the feed dial and the driving lever arm

shaft.

*Assembling note

• Check that the tooth of the feed dial and the groove of the feed adjusting gear are in the position shown in the

following figure.

4. Remove the retaining ring E5 from the driving lever arm shaft.

*Assembling note

• Turn the dial counterclockwise rotation, and then check the adjusting dial spring fall into the groove when it

contact the stopper.

Fig. 2-7

Screw, Bind M4X6

Set Screw, Socket (CP) M4X4

Screw, bind M4x6

Set screw, socket
(CP) M4x4

Adjusting dial
spring

Feed dial

Feed dial lid

Driving lever arm shaft

Retaining ring E5

Feed dial

Feed adjusting dial

Summary of Contents for 1034DX
























































































Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands

Brother 1034DX, Service Manual

Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands