Brother 1034DX Service Manual Download Page 23

Page: 23 / 87

Disassembly

2 - 12

isassembly

Main frame / Covers / Upper thread guide

Thread tension L assy

1. Remove the two screws (screw, bind M4x6) to remove the thread tension L assy.
2. Remove the screw (screw, bind M3x4) to remove the washer plain S 4.2, the spacer 3x2.5 and the

thread tension lever from the thread tension base.

3. Remove the spring (XB2471) from the thread tension release and the thread tension base. Remove the

thread tension release from the thread tension base.

*Assembling note

• Fully tighten the screw after performing

"Thread tension release adjustment"

Fig. 2-10

Screw, bind M4x6

Screw, bind M3X4

Thread tension base
(Thread tension L assy)

Screw, bind M3x4

Screw, bind M4x6

Washer plain S 4.2

Spacer 3x2.5

Thread tension
lever

Spring
(XB2471)

Thread tension
release

Thread tension releas

Spring (XB2471)

Thread tension base

Summary of Contents for 1034DX
























































































Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands

Brother 1034DX, Service Manual

Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands