Brother 1034DX Service Manual Download Page 71

Page: 71 / 87

3 - 7

Adjustment

Adjus

tme

Adjus

tme

Front / back position of lower looper adjustment

1. Turn the pulley counterclockwise rotation, and

then set the needle and the lower looper at the
position of the figure.

2. Loosen the screw (set screw, socket (CP) M4x4)

for the UL lever shaft assy.

3. Move the UL lever shaft assy, and then adjust

the gap of the needle (left) and lower looper to 0
to 0.05 mm.

4. Fasten the screw (set screw, socket (CP) M4x4)

for the UL lever shaft assy.

Pulley

Needle

Lower looper

UL threader

Movable
needle guard

UL lever

UL lever shaft assy

Lower
looper

Contact to
the end face

Lelt needle

Set screw, socket (CP) M4x4

UL lever shaft assy

0 to 0.05 mm

Left needle

Lower looper

Movable needle guard

Set screw, socket (CP) M4x4

Summary of Contents for 1034DX
























































































Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands

Brother 1034DX, Service Manual

Search results

Summary of Contents for 1034DX

Reviews:

Related manuals for 1034DX

Brands by name

Popular brands