8
InSeRTInG An SD/SDHC MeMoRy CARD
Expand your camera’s storage by using SD or SDHC memory cards.
inserting memory carD
Open the SD card compartment at the bottom of the camera.
Insert the SD/SDHC card into the memory card slot with the metallic part facing
the front side of the camera.
Push the SD/SDHC card into the memory slot until it clicks into place.
Close the SD card compartment.
removing a memory carD
Open the battery compartment.
Gently push the card deeper until it clicks and it pops out.
Pull out the card carefully.
CHARGInG THe bATTeRy
The battery that comes with your camera is not charged.
You need to charge the battery before using the camera.
Insert the battery into the battery charger as shown
at right.
Connect the battery charger to the adaptor.
Plug the adaptor into the main outlet.
note: the battery charging time is 2 hours.
TURnInG THe PoweR on AnD off
Press the
PoweR
button to turn on/off the camera. When turning on the camera, it may
function differently depending on the switched mode:
When the camera is switched to Movie or Photo Record mode and you turn on the camera,
the start-up image displays briefly and the start-up sound plays if enabled. The zoom lens
extends as well.
When the camera is switched to Playback mode and you turn on the camera, it will enter
Playback mode directly and the zoom lens will not extend.
note: see “modes” on page 9 to learn more about record and playback modes.
InITIAL SeTTInGS
When you turn on your camera for the first time, you will be asked to perform the initial
settings of your camera.
When you press the POWER button, the Language Menu is displayed on the LCD screen
for you to setup the display language.
setting tHe language
Press , , or to move through each selection.
Select a language, then press SET to apply.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
•
•
1.
2.
6
41
31
6_
in
s
_1
0
m
g
p
D
ig
ita
l c
am
er
a_
s
iz
e:
4
.7
5”
W
x
7
.2
5”
H
_o
ut
pu
t
at
1
00
%
_p
rin
ts
1
/0
B
la
ck
C
H
A
R
G
E