Brooks MT3809G Metal Tube, Supplemental Manual

Page: 18 / 52

5-4
Section 5 Transducer Blocks
Installation and Operation Manual
X-DPT-FF-MT3809G-Alarms-eng
Part Number: 541B218AAG
December, 2017 Model MT3809G F
OUNDATION
TM
Fieldbus
Index Sub Index
Parameter Name Description
Data Type
Valid Values
Initialized
Value
Read only or Read/W
rite
Table 5-1
Parameters of the Analog Input Transducer Block (continued)
Table continued on next page.
46 1 PULSE_OUTPUT.UOM Unit of measurement used to generate the pulses U16 Supported UOMS Gallon
Read/
Write
46 2 PULSE_OUTPUT.SCALER
The scale value scales the number of pulses according
to het flow
Float 0.1 to 10.0 1.0
Read/
Write
46 3
PULSE_OUTPUT.
PULSE_WIDTH
The pulse width of each pulse on the pulse output Float 0.00 to 50.0 50.0
Read/
Write
47
WEIGHTS_MEASURES_CALI
B
Information about the calibration U32 0 Read
48
WEIGHTS_MEASURES_CON
FIG
Information about the calibration U32 0 Read
49 INFO_METER
The info meter contains information about the meter.
The values which are a member of info_meter are not
used in the process
49 1
INFO_METER.
FLOW_HI_LIMIT
The maximum limit of flow for this meter Float
Calibrated
Value Read/
Write
49 2
INFO_METER.
FLOW_LO_LIMIT
The minimum of flow for this meter Float
Calibrated
Value Read/
Write
49 3
INFO_METER.
TEMP_HI_LIMIT
The maximum temperature for this meter Float
Calibrated
Value Read/
Write
49 4
INFO_METER.
TEMP_LO_LIMIT
The minimum temperature for this meter Float
Calibrated
Value Read/
Write
49 5
INFO_METER.
MATL
The material of this meter U8
Calibrated
Value Read/
Write
49 6
INFO_METER.
PRESSURE_HI_LIMIT
The maximum pressure for this meter Float
Calibrated
Value Read/
Write
49 7
INFO_METER.
PRESSURE_LO_LIMIT
The minimum pressure for this meter Float
Calibrated
Value Read/
Write
49 8
INFO_METER.
PRESSURE_DROP_LIMIT
Float
Calibrated
Value Read/
Write
49 9
INFO_METER.
FLANG_MATL
U8
Calibrated
Value Read
/Write
49 10
INFO_METER.
FLANGE_TYPE
U8
Calibrated
Value Read/
Write
49 11
INFO_METER.
FLOAT_MATL
U8
Calibrated
Value Read/
Write
49 12
INFO_METER.
FLOAT_TYPE Visible
String ASCII
Max 8 chars Calibrated
Value Read/
Write
49 13
INFO_METER.
ORING_MATL
U8
Calibrated
Value Read/
Write
49 14
INFO_METER.
SIZE
U8
Calibrated
Value Read/
Write
50 INFO_ACCESSORIES Accessories attached to the meter U8
Calibrated
Value Read/
Write
51
MAGNET_ANGLE_ADJUSTE
D The magnet angle of the measuring device after a zero
adjust
Float 0.0 Read
52
MAGNET_ANGLE_ABSOLUT
E
The magnet angle of the measuring device Float 0.0 Read
53 MAGNET_ANGLE_OFFSET
The offset which is used to calculate the magnet
adjusted angle from the absolute angle
Float 0.0 Read
54 VISCOSITY
54 1 VISCOSITY.UOM Units of measurements for the viscosity U16 Supported UOMs cP
Read/
Write
54 2 VISCOSITY.VALUE Float 1
Read/
Write
55 Calibration This group contains information about the calibration
55 1
CALIB.
FLUID Visible
String Reserved, do not use Read/
Write
55 2
CALIB.
TOOL Visible
String
Reserved, do not use
Read/
Write
55 3
CALIB.
ACC_CLASS Visible
String
Reserved, do not use
Read/
Write
55 4
CALIB.
NAME Visible
String
Reserved, do not use
Read/
Write
55 5
CALIB.
CALIB_DATA Visible
String
Reserved, do not use
Read/
Write
55 6
CALIB.
CALIB_FLOW_RATE_UOM
U16 Supported UOMs
Calibrated
Value Read/
Write
55 7
CALIB.
CALIB_TEMPERATURE_UOM
U16 Reserved, do not use
Read/
Write
55 8
CALIB.
CALIB_TEMPERATURE
Float Reserved, do not use
Read/
Write
55 9
CALIB.
CALIB_PRESSURE_UOM
U16 Reserved, do not use
Read/
Write
55 10
CALIB.
CALIB_PRESSURE
Float Reserved, do not use
Read/
Write
55 11
CALIB.
CALIB_DENS_UOM
U16 Reserved, do not use
Read/
Write
55 12
CALILB.
CALIB_DENSITY
Float Reserved, do not use
Read/
Write
55 13
CALIB.
CALIB_VISCOSITY_UOM
U16 Reserved, do not use
Read/
Write
55 14
CALIB.
CALIB_VISCOSITY
Float Reserved, do not use
Read/
Write