Delta Class SLA6900 UHP & SLA6800 Series Metal Sealed MFC's/MFM'
s
2-2
Section 2 Installation
Installation and Operation Manual
X-TMF-SLA6900-SLA6800-MFC-eng
Part Number: 541B100AAG
August, 2009
2-3 Recommended Storage Practice
If intermediate or long-term storage is required for equipment, as supplied by
Brooks Instrument, it is recommended that said equipment be stored in
accordance with the following:
a. In the original vacuum bag and shipping container.
b. In a sheltered area with the following conditions:
1. Ambient temperature 21°C (70°F) nominal, 32°C (90°F) maximum and
7°C (45°F) minimum.
2. Relative humidity 45% nominal, 60% maximum and 25% minimum.
2-4 Return Shipment
Prior to returning any Brooks equipment to the factory, contact the factory for
a Return Materials Authorization Number (RMA#). This can be obtained at
Brooks Instrument, Product Service Department, 407 West Vine Street,
Hatfield, PA 19440, or call toll free 1-888-554-FLOW (3569).
Also, completion of Form RPR003-1, Brooks Instrument Decontamination
Statement, as well as, a Material Safety Data Sheet (MSDS) for the fluid(s)
used in the meter, is required before any Brooks Personnel can begin
processing the equipment. Copies of the form can be obtained at the
locations listed below.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: [email protected]
www.BrooksInstrument.com
Brooks Instrument
Brooks Instrument
Neonstraat 3
1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands
Tokyo, 136-0073 Japan
P.O. Box 428
Tel +81 (0) 3 5633 7100
6710 BK Ede, Netherlands
Fax +81 (0) 3 5633 7101
Tel +31 (0) 318 549 300
Email: [email protected]
Fax +31 (0) 318 549 309
E-mail: [email protected]
2-5 Removal from Storage
Upon removal from storage, a visual inspection should be conducted to verify
the condition of the equipment is “as received.” If the equipment has been in
storage in conditions in excess of those recommended (See Section 2-3), the
device should be subjected to a pneumatic pressure test in accordance with
applicable vessel codes. To maintain the ultra-clean integrity, this service
should be performed by the factory or one of the authorized service centers.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
