WARNING!
IMPORTANT SAFETY INSTRUCTIONS
IMPROPER USAGE CAN LEAD TO SEVERE INJURY OR DEATH
READ AND FOLLOW ALL INSTRUCTIONS
•
Commercial/Industrial Sliding Door Operator
for trained traffic* use only. The manufacturer of this product does not
include external safety devices as a standard feature.
•
External safety devices
are required on this door operator. Refer to the Terminal Strip Hookup in this manual for proper
wiring and to the owner’s manual of the external safety device manufacturer for proper installation and use.
•
No person shall perform any service or activate this door operator unless they have been properly trained in its safe
usage and have read the owner’s manual.
•
Never let children operate or play with door controls.
•
Before activating this door operator, check the following:
1. Assure that all personnel are clear of the path of this operator and the door that it is attached to.
2. Assure that all fingers, hands, feet, limbs and articles of clothing are clear of all moving parts and pinch points.
•
Personnel should keep away from a door in motion and keep the moving door in sight until it is completely closed or open.
NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.
•
Test the door’s safety features at least once a month. After adjusting either the force, speed or the limit of travel, retest
the door operator’s safety features. Failure to do so may cause severe injury or death.
•
KEEP DOORS PROPERLY OPERATING AND BALANCED. Refer to door manufacturer’s manual. Have repairs done
by trained technicians.
•
Prior to performing any service on this product (including the replacement of any fuses or circuit breakers), disconnect the
operator from the supply voltage.
•
For continued protection against fire, replacement fuses or circuit breakers shall be of the same type and ratings as those
being replaced.
*Defined in ANSI 156.10 as a controlled group of people trained in the safe use and operation of a particular door installation.
SAVE THESE INSTRUCTIONS