operator. For ‘G’ series and above, use the
gray
cable and plug the opposite
round end into the receptacle on the end cover of the operator (right side).
2. A “Please Wait” message will flash for a few seconds and then a selection screen
will show.
3. Choose either Master / Slave or Standard operator. For Master / Slave, select
Lead or Follow Door on the next screen, then skip to step 6.
4. For Standard operator, choose the appropriate ship date of the operator on the
next screen.
5. You’ll be given a display of the first three user presets. To edit a preset, simply
touch the preset
number value
.
6. You’ll then be given a keypad display for entering the new preset. Enter the
desired value and touch the enter (back arrow) key to set the value. Press
ESC
to cancel and go back to the preset list.
7. Press Next to display the remaining user presets.
*Note: Real Time Door Position (RTDP) is always displayed on both preset screens
DAU Instructions
DAU GT-01 Touch Screen
1. Plug the eight prong Phoenix Connector into DAU. For operator series before
‘G,’ use the
black
cable, plug the opposite round end into the PLC unit on the
