BRONKHORST IQ+Flow series Instruction Manual Download

Page: 32 / 33

Bronkhorst®

Instruction Manual IQ+FLOW® Series Digital Mass Flow / Pressure Controllers for Gases

9.17.045V

5.4

Service

If you have questions about the product or if you feel the product does not meet the specifications agreed upon, do not

hesitate to contact us. To enable us to help you quickly and effectively, make sure to have the serial number ready

whenever seeking contact with Bronkhorst about a specific item. The serial number (SN) is the key to the original purchase

order and can be found on the product.

For current information on Bronkhorst® and service addresses, please visit our website:



www.bronkhorst.com

Do you have any questions about our products? Our Sales Department will gladly assist you selecting the right product for

your application. Contact sales by e-mail:

›

[email protected]

For after-sales questions, our Customer Service Department is available with help and guidance.

To contact CSD by e-mail:

›

[email protected]

No matter the time zone, our experts within the Support Group are available to answer your request immediately or ensure

appropriate further action. Our experts can be reached at:



+31 859 02 18 66

Bronkhorst High-Tech B.V.

Nijverheidsstraat 1A

NL-7261 AK Ruurlo

The Netherlands

Summary of Contents for IQ+Flow series


































Search results

Summary of Contents for IQ+Flow series

Reviews:

Related manuals for IQ+Flow series

Brands by name

Popular brands

BRONKHORST IQ+Flow series, Instruction Manual

Search results

Summary of Contents for IQ+Flow series

Reviews:

Related manuals for IQ+Flow series

Brands by name

Popular brands