3
Attention:
Read before starting up the power pack
-
Prior to replacing fuses, halogen (bulb) lamps or flash tubes, discharge the power
pack and disconnect from power supply. Disconnect the lamp base from the power
pack.
-
These units are designed for use in dry areas. Protect them from dripping and
splash water and from excessive exposure to dust.
-
The units are not suitable for use in an environment where there is a risk of
explosion.
-
The accessories mounted onto the lamp bases may heat up to high temperatures
under specific conditions. Handle with care!
-
With due allowance for heat radiation, lamp bases with more than 100 W modelling
light may be directed towards inflammable surfaces only at a minimum distance of
1 m.
-
For safety reasons, never operate the lamps without the protecting glass
in place.
-
Flash light contains, similar to sunlight, a specific portion of UV radiation. The
undesirable side effects on skin and eyes are considerably reduced by using flash
tubes and protecting glasses with an UV coating. Without these or other protective
filters, use with extreme care when shooting.
-
Even when disconnected from the power supply, dangerous voltages may remain
inside the unit. For this reason units should be opened by authorized broncolor
service persons only.
-
If the unit Power Dock is not connected with the power pack, the delivered
transport cover must be set up. In particular no metal objects should contact the
Power Dock pin contacts.
-
Do not cover the cooling louvers on the unit.
-
broncolor
power packs and lamp bases meet an extremely high safety standard.
When connecting
broncolor
products to other manufacturers' products, integrated
safety measures may become ineffective. Due to different design features and
contact assignment of the lamp plugs of other brands, the user himself/herself may
even be at risk. We offer no guarantee and accept no liability for damages which
may be caused by this type of usage.
Summary of Contents for Verso A2 plus
Page 5: ...5 also valid for Verso A4 ...
