background image

bromic.com

3

IMPORTANT

!

WARNING

• 

Read all instructions before installing or using this  

device.

• 

Use this device only as described in this manual. Any 

other use not recommended by the manufacturer may 

cause radio interference, fire, damage to the product, 

injury or death to people.

• 

Improper installation, adjustment, or alteration and  

failure to follow the warnings and instructions in this            

manual could result in personal injury, death, or  

property damage.

• 

The manufacturer is not responsible for any  

damage that could happen from improper use. The  

manufacturer emphasises that this device must be  

used in a responsible manner and that all procedures, 

warnings, and safety instructions contained in this 

manual and application be followed strictly.

• 

The connection cables must be protected against any 

accidental impacts.

• 

This device is not suitable for outdoor uses.

• 

Do not install the device directly near high humidity  

areas or where exposed to water such as outdoor, or 

indoor near a bathtub, shower or swimming pool. 

• 

This device is not intended for use by people (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for 

their safety.

• 

Keep packaging materials out of reach of children.

• 

Children should be carefully supervised when they are 

in the area of the device.

• 

Do not open the device.

• 

Do not attempt to alter the device in any manner.

• 

Do not paint any surface of the device.

• 

Do not touch the device with wet hands at any time.

• 

Do not use or store flammable materials near this  

device.

• 

Do not spray aerosols or flammable materials in the  

vicinity of the device while it is in operation.

• 

Never operate the device in an explosive environment 

such as areas where petrol or other flammable liquids 

or vapors are stored.

• 

This device is NOT intended to be installed on    

recreational vehicles and/or boats.

• 

Do not run cord under carpeting. Do not cover with 

throw rugs, runners or the like. Arrange cord away  

from traffic area and where it will not be a trip hazard.

• 

This Setup and User manual should not be removed 

from the site of installation. Installer should leave man-

ual with the customer for future reference.

IMPORTANT NOTES & WARNINGS

CONFIGURATION

• 

After unpacking, make sure the device shows no 

signs of visible damage or tampering. If the device 

appears damaged, contact the place of purchase 

for assistance.

• 

This device must only be used on a 5 Volt  DC  

electrical supply. 

OPERATION

• 

This device requires power supply during 

operation. Ensure it is powered at all times.  

• • 

The Smart-Heat Connect does not receive 

The Smart-Heat Connect does not receive 

radio feedback from the Controller(s). Always 

radio feedback from the Controller(s). Always 

verify device status to ensure App operations are 

verify device status to ensure App operations are 

successful. 

successful. 

• 

The signal of the device can be affected by other 

appliances working on the same frequency or if the 

product is shielded by metal parts.

• 

The Smart-Heat Connect requires the use of an AC 

to DC 5V power supply (provided).

• 

Ensure the Smart-Heat Connect is located within 

30m from all the Controller(s).

MAINTENANCE/ REPAIR

• 

This product does not require maintenance and  

cannot be repaired.

• 

If damage to the device is suspected, discontinue use 

immediately and contact the supplier or  

qualified person to replace.

• 

The device has no serviceable parts inside. 

• 

At the end of this product’s useful life, it must not 

be disposed of as domestic waste, but must be 

taken to a collection centre for waste electrical and 

electronic equipment. It is the user’s responsibility 

to dispose of this device through the appropriate 

channels at the end of its useful life. Failure to do 

so may incur the penalties established by laws gov-

erning waste disposal. Proper differential collection 

and the subsequent recycling, processing  

 

and environmentally compatible disposal of  

waste equipment avoids unnecessary damage to 

the environment and possible related health risks, 

and also promotes recycling of the materials used 

in the appliance. For further information on waste 

collection and disposal, contact your local waste 

disposal service, or the place of purchase.

Summary of Contents for SMART-HEAT CONNECT













Reviews: