BC300EN Broilchef Natural Gas Grill
Owner’s Manual
16
Part Description QTY
Part Description QTY
AAA Motor
support
1
DDD
Motor
1
BBB Shaft
1
EEE Roller
1
CCC Balance
block
1
FFF Fork
2
Step 22 (Battery insertion)
a) Release the cover of igniter by turning the cover
counter-clockwise.
b) Insert the battery (KK) into the igniter.
Note: positive pole “+” face outside when insertion.
c) Screw the cover of igniter back.
Step 23 (Light installation. Option)
a) Insert the light (GG) into the hole on right side table.
ROTISSERIE KIT ASSEMBLY (Option)
a) Insert the shaft (BBB) into the hole on the two forks
(FFF), tighten the bolt on forks by hand until it is secured.
b) Insert the balance block (CCC) and roller (EEE) into
shaft in sequence as shown.
a) Loosen the pre-attached nuts and bolts on the motor support (AAA).
b) Align the hole one the motor support (AAA) w/ the hole on the left side wall of firebox.
c) Insert one bolt, one flat washer and one nut into each pre-drilled hole and tighten using the screw driver provided.
d) Insert the motor (DDD) into the motor support (AAA) and push down until it is in place.
e) Insert the shaft assembly above into the hole on motor (DDD) and move the balance and roller (EEE) to correct position
as shown. Make certain the bolt on roller is tighten before operation.
