I N S TA L L AT I O N G U I D E F O R 2 . 2 7 0 2 . 9 0 & 2 . 2 7 0 2 . 9 2
M I X E R I N S TA L L AT I O N :
1. Shut off water supply.
2. Remove the fixing nut and mounting plate from the bottom of the mixer. Ensure
not to remove o-ring seal from the trim. It must be there to seal the mixer to the
bench top.
3. Screw the braided hose into the bottom of the mixer.
4. Fit the mixer with the trim to the bench top.
5. Refit the mounting plate and fixing but to the underside of the mixer. Do the nut up
finger tight. Ensure the tap is aligned and in the correct position.
6. Secure the tap by tightening the fixing nut using a wrench or a spanner.
C O N T I N U E T O P A G E 1 3 F O R F O L LO W I N G I N S T R U C T I O N S T O C O M P L E T E T H E I N S TA L L AT I O N
O F Y O U R B R O D W A R E S E N S O R TA P
7
8
Summary of Contents for 2.2702.90
Page 13: ...I CSEN 210509...
