X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
Monitoring the Device
Introduction
This device is engineered for high reliability, high availability, and enhanced serviceability (RAS) and requires no routine
operational steps or maintenance. This chapter provides information about determining the status of each component
using LEDs and CLI commands. Refer to the
Brocade Fabric OS Web Tools Administration Guide
and the
Brocade Fabric
OS Administration Guide
for additional information.
Interpreting FC32-X7-48 Port Blade LEDs
See the following figure and table to interpret the LED patterns for the FC32-X7-48 blade. The LED patterns temporarily
change during the POST and other diagnostic tests.
Figure 40: FC32-X7-48 Port Blade LEDs
1. Blade Power LED
2. Blade Status LED
3. Status LED for Upper FC port
4. Status LED for Lower FC port
The following table describes the port blade LED patterns and the recommended actions for those patterns.
X7-4-Install-IG100
86
Broadcom
Summary of Contents for Brocade X7-4 Director
Page 215: ......
