X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
Slot 8/Port 0: --
Slot 8/Port 1: --
Slot 8/Port 2: --
Slot 8/Port 3: --
Slot 8/Port 4: --
Slot 8/Port 5: --
Slot 8/Port 6: --
Slot 8/Port 7: --
Slot 8/Port 8: --
Slot 8/Port 9: --
Slot 8/Port 10: --
Slot 8/Port 11: --
Slot 8/Port 12: --
Slot 8/Port 13: --
Slot 8/Port 14: --
Slot 8/Port 15: id (sw) Vendor: BROCADE Serial No: JAF315420000188 Speed: 8,16,32_Gbps
Slot 8/Port 16: --
Slot 8/Port 17: --
Slot 8/Port 18: --
Slot 8/Port 19: --
Slot 8/Port 20: --
Slot 8/Port 21: --
Slot 8/Port 22: --
GE: Slot 4/Port 17: --
slotShow
Use the
slotShow
command to display the current status of each blade in the system. Depending on the option used, the
command retrieves information on blade type, blade ID, status, Brocade model name, and power usage for each slot in
the switch or chassis. Use the
-m
operand to display the blade model name and status.
Following is an example of
slotShow
output.
NOTE
The most common status is shown. A status of Faulty (51) would display for a POST failure during power-on or
a blade hot-plug.
Core-X7-8:admin> slotshow -m
Slot Blade Type ID Model Name Status
--------------------------------------------------
1 CP BLADE 220 CPX7 ENABLED
2 CP BLADE 220 CPX7 ENABLED
3 AP BLADE 186 SX6 ENABLED
4 AP BLADE 186 SX6 ENABLED
5 SW BLADE 218 FC32-G7-48 ENABLED
6 SW BLADE 216 FC64-48 ENABLED
7 CORE BLADE 215 CR64-8 ENABLED
8 CORE BLADE 215 CR64-8 ENABLED
9 AP BLADE 186 SX6 ENABLED
10 SW BLADE 204 FC32-64 ENABLED
11 SW BLADE 204 FC32-64 ENABLED
X7-4-Install-IG100
113
Broadcom
Summary of Contents for Brocade X7-4 Director
Page 215: ......