manualshive.com logo in svg

Broadcom Brocade X7-4 Director, Hardware Installation Manual

Share
Download
Broadcom Brocade X7-4 Director Hardware Installation Manual Download Page 154

X7-4-Install-IG100 Installation Guide

 

Brocade

®

 X7-4 Director Hardware Installation Guide

HA Enabled, Heartbeat Up, HA State Synchronized

3. Enter 

firmwareShow

 to verify that the firmware version has been updated and that the versions are the same on the

two CP blades.
If you have one or more port or extension blades in the device, the Fabric OS automatically detects mismatches

between the active CP firmware and the blade's firmware and triggers the auto-leveling process. This auto-leveling

process automatically updates the application blade firmware to match the active CP blade. At the end of the auto-

leveling process, the active CP and extension blades will run the same version of the firmware.

4. Enter the 

chassisEnable

 command to enable all user ports in the chassis and enable a virtual, fabric-aware

chassis.

5. Replace the chassis door. The door is required to meet EMI compliance.
6. Pack the faulty CP blade in the packaging provided with the new CP blade, and contact the switch supplier to

determine the return procedure.

Verifying Blade Operation

Perform the following tasks to verify operation of new blade:
1. Check the LED indicators on the blade's front panel. For information on interpreting LED patterns, see 

Interpreting

Control Processor Blade LEDs

.

2. Enter the following commands and note any error conditions:

•

slotShow

 – Displays the current data on each slot in the system, including blade type, blade ID, status, Brocade

model name, and power usage.

•

haShow

 – Displays control processor (CP) status.

•

tempShow

 – Displays temperature reading of blades.

•

sensorShow

 – Displays temperature reading of blades with fan and power supply status.

•

errDump

 – Displays the entire system error log.

•

errShow

 –Displays error log messages one at a time.

See 

Using Monitoring Commands

 and the 

Brocade Fabric OS Command Reference Manual

 for output

examples and additional information on Fabric OS commands. For more information about error messages,

refer to the 

Brocade Fabric OS Message Reference Manual

.

 

X7-4-Install-IG100

154

Broadcom

Summary of Contents for Brocade X7-4 Director
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands