X7-4-Install-IG100 Installation Guide
Brocade
®
X7-4 Director Hardware Installation Guide
6. Reinstall the device door if removed. See the procedures for removing and replacing the device door in this guide.
Installing the Device in a 27-31-Inch Rack (XBR-DCX4S-0121)
Use the following instructions to install the device in a rack with rail-to-rail depth of 68.58 to 78.74 cm (27 to 31 in.). Be
sure to use the 27-31 in. 8U Chassis Airflow Diversion and Port Side Exhaust Kit for Four-Post Rack (XBR-DCX4S-0121)
for this installation.
Parts List
Use he following parts for the Airflow Diversion and Port Side Exhaust Kit.
NOTE
Not all parts may be used with certain installations depending on the device type.
Table 9: Hardware for Airflow Diversion and Port-Side Exhaust Kit for 68.58 to 78.74 cm (27-31 in.) Racks
Description
Quantity
Top rail
1
Duct
1
Shelf
1
10-32 x .5 in. (1.27 cm) Phillips Screw (blue Loctite on threads)
12
10-32 x .63 in.(1.60 cm) Phillips Screw with square cone washer
12
10-32 clip nut for racks that have rails with round holes
8
10-32 retainer nut for racks that have rails with square holes
8
Alignment washer for racks that have rails with square holes
12
6-32 x .25 in. (.635 cm) Phillips Screw
2
X7-4-Install-IG100
37
Broadcom
Summary of Contents for Brocade X7-4 Director
Page 215: ......
