NetXtreme II
User Guide
January 2010
Bro a d c o m C o rp o r a ti o n
Page 194
Configuring Teaming
Document ENGSRVT52-CDUM100-R
10.
If you want to configure LiveLink, select
Yes
, otherwise select
No
, then click
Next
.
11.
Select the probe interval (the number of seconds between each retransmission of a link packet to the probe target) and
the maximum number of probe retries (the number of consecutively missed responses from a probe target before a
failover is triggered).
12.
Set the Probe VLAN ID to allow for connectivity with probe targets residing on a tagged VLAN. The number set must
match the VLAN ID of the probe targets as well as the port(s) on the switch to which the team is connected.
NOTE: Each LiveLink enabled team can only communicate with Probe Targets on a single VLAN. Also, VLAN ID 0
is equivalent to an untagged network. If the Probe VLAN ID is set to a value other than 0, then a VLAN must be
