e-mail:
voice:
360.854.9559
fax:
360.854.9479
4
TS-6 Installation and Operation Manual
DESCRIPTION
PRODUCT DESCRIPTION
The TeleSwitch Six call director offers a low cost solution to interfacing up to six
telephones lines to almost any hybrid. The TeleSwitch Six is supplied with one
Switch Console and Controller. The units are interconnected via CAT 5 cable. A
total of four Switch Consoles may be attached to the controller. The Switch Console
is equipped with push buttons for line selection and control features, dialing pad,
bright LED indicators and RJ-11’s for local telephone set and hybrid connections.
The TeleSwitch Six is a dual-buss device, meaning that calls can be answered on the
telephone set, while calls are active on the hybrid. With TeleSwitch Six, lines can
be answered, placed on hold (MOH audio input), busied out and routed to a tele-
phone set and/or hybrid. Robust switches with bright LED indicators indicate
whether a line is ringing, on-hold, busied out along with other functions.
The operation of the TeleSwitch Six is similar to that of a multi-line telephone set.
To answer a call directed to the hybrid, press the button of the ringing line. To
answer a call with the telephone set, press the “PHONE” button and then press the
button of the ringing line. To disconnect a call, press the “DROP” button, then the
desired line button. The conference feature allows button mash conferencing, plac-
ing multiple lines on a single hybrid. In addition to these standard features,
TeleSwitch Six offers additional special functions.
Seven special function buttons:
• NEXT selects the line on hold the longest.
• BUSY, the first press of this button all lines that are neither in use, nor on hold
will be placed on hold. The next press of this button will drop all lines.
• FLASH has two functions, one to simulate hook-flash or to allow auto-answer
of calls
• REC when pressed will begin flashing the red REC led. The record relay will
not be engaged until a line button is pressed. When the record input goes low,
the REC LED will change to solid red. The REC relay will stay energized until
the STOP button is pressed. The STOP LED will flash and the record relay will
turn off along with the REC LED.
• DELAY activates the DLY relay that may be used to control a remote profani-
ty delay.
• OPT will toggle the OPT relay on and off. The yellow opt LED will not light
until contacts are closed.
