5
Accessories
INSTALLATION INSTRUCTIONS
Note:
Excepting the above parts provided mentioned above, other parts required are field supplied/purchased.
Spirit l
evel
Screwdriver
s
Electric drill,
Hole core drill (
φ
65
mm)
Flaring tool set
Specified torque wrenches: 1.8kgf.m, 4.2kgf.m,
5.5kgf.m, 6.6kgf.m
(depending on model)
Spanner
s
Allen key
(4mm)
L
eak detector
Tools
required
for installation:
Vacuum pump
M
anifold
gauges
User manual
Thermometer
Multimeter
Pipe cutter
T
ape
measure
Field supplied parts
Consult specifications
for the proper sizes.
6.35
9.52
9.52
12.7
15.9
6
2
Self-tapping Screw B ST2.9X10
Remote control
Installation Plate
Accessory Description
Self-tapping Screw A ST3.9X25
Seal
Drain Joint
Magnetic Tyroid
(Install on the interconnective cable between indoor
unit and outdoor unit after installation.)
Cord protection sheath
(
For smaller cables, if the cord clamp cannot fasten the cord
please use this sheath to ensure adequate clamping.
Transfer connector
(Pipe reducer -
indoor or outdoor unit, depending on model)
(
NOTE:
Pipe sizes differ from unit to unit.
To meet different pipe size requirement, depending on
the pipe sizes, the pipe reducer may be required to be
fitted to the outdoor unit connections.)
Packed with the
Connecting
pipe
Liquid side
Plastic Expansion Sheath
Number
Qty/unit
Gas side
7
Remote controller holder
1
1
5-8
(depending on model)
5-8
(depending on model)
1
1
Optional part
(one piece/one cable)
Optional part
(one piece/indoor unit)
Optional part
(1-5 pieces for outdoor
unit, depending on model)
1
(on some models)
1
5
4
9
11
12
10
8
3
2
1
Optional
parts
refrigerant
De-burring tool
