Brivis 15
Evap AC IM
7.6 SETTING UP MULTIPLE COOLERS ON THE NETWORK
To ensure each Cooler is configured correctly to the Brivis Networker see the instructions below and refer to the
Brivis Networker Advanced Programming Manual No� 400 (Available on request from Brivis Customer Service)�
As the Brivis Networker is polarity sensitive when more than one Cooler is installed on a Brivis Networker all the
Coolers should be wired in parallel (see diagrams below)�
To ensure each Cooler is configured correctly to the Brivis Networker, each Cooler
MUST BE
:
•
Given a different specific identification number, starting at No. 1.
•
Designated to a zone (refer to the Brivis Networker Advanced Programming Manual No� 404)�
Each Cooler comes with the ID number set at number 1. To give it a new number, first complete the installation
and wiring of all the units, as described previously and follow the instructions on the next page� (Changing an
Identification Number)
Brivis Networker
Cooler No�1
Cooler No�2
Cooler No�3
Cooler No�1
Brivis Networker
Typical Brivis AD Application
Typical Brivis Advance, Brivis Promina & Brivis Contour
Cooler No�3
Cooler No�2
7. NETWORK CONNECTION
Summary of Contents for AD BAL AD56
Page 31: ...Brivis 31 Evap AC IM NOTES ...
