Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
64
65
CARE & MAINTENANCE
CARE & MAINTENANCE
TO REPLACE COVER:
A. Stretch the cover over the top of the restraint first, then the
sides, then stretch the cover around the rim of the restraint.
Attach the elastic loops to the hooks on the restraint at the
bottom of the restraint and up the top. Reattach the press
studs in the middle panel, feed the crotch buckle through
slots in cover.
Hook clip on both sides of the seat next to the forward facing
belt path slots.
Do not use excessive force to stretch the cover as it may be
damaged.
B. Feed the crotch buckle, harness straps through the slots in
the cover. Feed the adjuster harness strap. Ensure their are
no twists.
Attach the elastic loops at the
bottom of the restraint
Attach the elastic loops at the
back of the restraint
Press
studs
Feed the
crotch
buckle
through slots
in cover
D. Replace headrest cover by lifting elastic over headrest
wings and feeding through AHR Easy Adjust Headrest lever.
Clip in the press studs on the on the cover underneath the
headrest wings.
E. Refit the shoulder pads or other accessories if required.
If the headrest has moved then reset the headrest so the
shoulder straps are near the shoulder.
F. Refit to the vehicle.
See pages 66 to 67 to remove or replace any accessories.
Clip press stud
Replace headrest cover over
headrest wings
Unhook clips both sides
