manualshive.com logo in svg

Britax safe-n-sound maxi lite, Instructions For Installation & Use

Share
Download
Britax safe-n-sound maxi lite Instructions For Installation & Use Download Page 15

Instructions for Installation & Use - Series No. 8100/A/2013

Instructions for Installation & Use - Series No. 8100/A/2013

28

29

HOW TO USE

HOW TO USE

 

TODDLER USE

(WITH IN-BUI

LT

 HARNE

SS

)

 

TODDLER USE

(WITH IN-BUI

LT

 HARNE

SS
)

SECURING CHILD IN THE RESTRAINT

A.  Place the child in the restraint and feed each arm through 

shoulder straps. Pull the harness buckle up between child's 
legs.

     Engage the buckle tongues and tighten the harness as 

described on the next page.

(1) Pull shoulder strap through the buckle.

(2) Then, pull harness adjuster strap to tighten.

C.  Release the AHR Easy Adjust Headrest 

Lever so that it locks into position. Ensure 
that it has locked in position by gently 
pushing down on it.

D.  If the headrest is adjusted with the child in 

the seat, always check that the cover has 
not bunched up behind the child’s back.

NOTE: For comfort ensure the bottom edges 
of the headrest are not contacting the child’s 
shoulders but just above the shoulders. 

Lift the lever 
at the top of 
the headrest 
then pull 
up or push 
down 

Always adjust the height of the shoulder 
straps as the child grows.

         IMPORTANT :

B.  Fit either harness tongue into the harness buckle followed 

by the other tongue. A click is heard when the second 
tongue is fully engaged.  
Should the second tongue not insert - press the red button 
and reinsert the tongues. Check secure engagement 
by pulling harness straps. (If the harness buckle does 
not engage correctly, it may require cleaning or seek 
replacement - refer to page 60).

C.  Ensure slack is removed from harness lap strap by pulling 

shoulder straps then pull harness adjustment strap to adjust 
harness to a comfortable but firm fit. Ensure that all slack in 
harness straps is removed. Shoulder harness straps must 
fit firmly to the child. Do not over tighten. A loose harness 
could result in serious injury in an accident. 

Do not use restraint if straps do not tighten. Contact your local 
authorised service agent for repair.

Harness 
Lap Straps

Shoulder 
Straps

Crotch 
Straps

Pull to remove slack from 

harness lap straps

B

C

WARNING :                                              
DO NOT LEAVE CHILDREN 
UNATTENDED IN THE CAR.

Click

Tongue

Buckle

2

1

2

1

1

2

Summary of Contents for safe-n-sound maxi lite








































Reviews:

No comments

Brands by name

Popular brands

Load more brands