Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
30
31
TODDLER USE
(WITH IN-BUI
LT
HARNE
SS
)
SPECIAL FEATURES - CHILD USE
1. AHR Easy Adjust Headrest Lever
2. Adjustable Headrest
3. Red seatbelt path labels (Booster Seat)(1 each side)
4. Harness Buckle
5. Lap belt SLIDEGUARD™ Clip (Stored, see page 34)
6. Harness Adjuster Lever
7. Padded cover for comfort
8. Sash guide in headrest (Red seat belt path Label)
9. Shoulder Height Markers
HOW TO REMOVE
TO REMOVE RESTRAINT FROM VEHICLE
A. Disengage seatbelt tongue from buckle and remove from
restraint.
B. Fully press top tether strap adjuster button (A) while pulling
top tether strap (B) to slacken as shown right. In some
vehicles loosening of the top tether strap may be difficult. If
so, try pushing the restraint against the vehicle seat back or
slightly lifting the restraint to release the tension.
C. Disengage the attachment clip from the car's upper
anchorage point. The child restraint is now disconnected
and can be removed from the car.
Fully press adjuster button (A)
while pulling top tether strap (B)
to lengthen.
B
Roll up excess
strap and store in
the pocket attached
to the cover to
avoid tripping
when moving the
restraint.
A
TO REMOVE CHILD FROM RESTRAINT
Press the red button on harness buckle then both harness tongues will be released. You may lengthen the
harness by pressing the adjuster button or lifting the adjuster lever and pulling the shoulder straps. Move
each shoulder strap to the child's side, then remove the child.
If buckle tongue holders are provided, store the tongues in these.
2
1
7
4
6
9
3
5
8
CHILD USE
(BOOSTER SE
AT
MODE)
