![Britax safe-n-sound maxi lite Instructions For Installation & Use Download Page 25](http://html1.mh-extra.com/html/britax/safe-n-sound-maxi-lite/safe-n-sound-maxi-lite_instructions-for-installation-and-use_2814117025.webp)
Instructions for Installation & Use - Series No. 8100/A/2013
Instructions for Installation & Use - Series No. 8100/A/2013
48
49
CHILD HARNESS PREPARATION
CHILD HARNESS PREPARATION
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
Hook the Attachment Clip
onto VERSATETHER™
Catch.
Pull left hand harness strap
through the opposite slot until the
straps are of equal length.
C. Pull the left hand Harness Strap & Cross Strap back
through the opposite shoulder slot. Hook the Child
Harness Attachment Clip onto the VERSATETHER™
Catch and ensure that the straps are equal in length.
IMPORTANT:
Always adjust the height of the shoulder straps as
the child grows.
VERSATETHER™ is only intended for use in
attaching a child harness.
HEADREST POSITION:
Before installation ensure that the headrest is set to the correct height for your child (refer to page 27).
Headrest should be just above the child's shoulders.
The Child Harness shoulder straps must be in the
slots which are nearest to the child's shoulders, but
not lower than the child's shoulders.
Orange = Child Harness straps
through slot and under cross bar.